Noal

Fabrication Instructions 1. Take a duration of em dust tobacco pipe and cut it to the length of 7 inches. Take another length and cut it to 12 inches.

2. Glue paper rings to peerless end of the 7 inch tube and space them 2 inches apart.

3. Glue the 7 inch luggage compartment tube to the 12 inch body tube by putting gum on the inside of the 12 inch tube and inserting the 7 inch tube.

4. Coat the outside of the yellow paper railway locomotive block with glue and push it into the 12 inch tube the length of one engine.

5. Cut the fins out of balsa wood.

6. turn back the 12 inch tube using the end locating drawing as reference.

7. Glue the fins onto the 12 inch body tube along the markings.

8. Glue on the straw to the 12 inch body tube.

9. Cut out the crescent approach pattern that attaches both body tubes and glue it around the body tube.

10. occlude and glue the pile and the trapezoid shaped paper. It should be folded in thirds, then glued to the inside of the 7 inch body tube.

11.



Attach the cord to the nose cone.

12. Take the streamer and restrict it to the middle of the cord.

13. Fold the streamer in half and scroll it up and stick it into the body tube.

14. Pack the rest of the cord into the body tube and put the nose cone into the body tube.

If you want to get a full essay, order it on our website: Orderessay



If you want to get a full essay, wisit our page: write my essay .